Better engineered solutions for you concrete cutting needs

410-398-1494 Maryland / 844-787-3288 Tennessee

Services Provided

Core Drilling

A core drill is a drill specifically designed to remove a cylinder of material, much like a hole saw. The material left inside the drill bit is referred to as the core. Core drills can be used to cut metal, rock and concrete. Core drills used for concrete are generally called Diamond Core Drills and most are water cooled. For dry drilling needs PCD bits can be used.

Slab Sawing

 Slab sawing or flat sawing is used to cut horizontal surfaces such as floors, bridges and pavement. This process is sophisticated, cutting surfaces from 8 inches to 27 inches in depth to access below-slab water pipes, sewer lines and similar utilities. Other typical uses include sawing to create new machine foundations, highway patching, plumbing trenches, repairing runways and to create stairwells, elevator openings, expansion joints and decorative cuttings.

Wall Sawing

Concrete wall sawing employs a circular blade on a track-mounted machine that can climb walls and cut ceilings. It is employed to cut walls between 8 inches and 36 inches thick. Uses include cutting openings in concrete foundations, lowering foundation elevation, and full wall removal. This procedure is highly skilled, requiring smooth plum and level openings and is more expensive than other concrete cutting methods. Concrete wall sawing is dustless, vibration-free and quiet.



Wire Sawing

A wire saw is a powered saw that uses a diamond laced cable that is strung around item to be cut and coupled together.  It is spun and tension is applied causing the wire to cut as it is pulled thru the material. It will cut stone, concrete, steel and plastic as well as many other objects.

Floor Grinding / Surface Preparation

If you need to prep or level a surface or fix a trip hazard we can grind it down for you. In the photo above the entire basin of this spillway was scabbled prior to new concrete being placed.

Demo / Removal

We are able to use both destructive and non-destructive methods for your concrete removal needs. Big or small we can remove it all.

About Us

Short History

Innovative Cutting, Inc. was opened in Baltimore, Maryland on January 5, 2001. Since that time, we have completed jobs throughout the United States ranging from 375 dollars to 1.4 million dollars. On January 4, 2017, we launched a branch of Innovative Cutting in Cookeville, Tennessee, Allowing us  to service Middle Tennessee and the surrounding area. We pride ourselves in completing our work on time and within budget. We also provide value engineering where we can to save both time and money. 

If you allow Innovative Cutting to complete your project, you can be assured you will be getting the best value for your money. 

Contact Us

Drop us a line!

CONTACT US


Maryland Office  -  410-398-1494

Ryan Duhamell - 443-309-6801

Ryanduhamell@innovative cutting.com




Tennessee Office -  844-787-3288

Doug Harrison - 443-286-8643

Doug@innovativecutting.com


Nathan Birdwell - 931-854-8577

Nathan@innovativecutting.com

Locations

Maryland

80 Molitor Road

Elkton Md 21921

Tennessee

2033 Gainesboro HWY

Bloomington Springs TN 38545